Flint, Michigan · Operated crane response
Emergency Crane Service in Flint, MI
A machine is down in a Flint plant and the cost is measured in production hours. LMM (formerly Lee Machinery Movers) mobilizes operated cranes and rigging crews into Genesee County.
Flint sits on the I-75 corridor between LMM's Pontiac operations to the south and the Saginaw branch opened in 2025 to the north, so crews, supervisors and equipment reach a Flint plant from two directions rather than one. Crews and equipment come from those Pontiac and Saginaw facilities rather than from a yard in Flint itself — close enough to respond, deep enough to send the right machine for the access and the load. Mechanical failure, structural instability, an urgent removal, an urgent install: operators hold NCCCO certification, cranes run from 15 to 500 tons, and one team stays accountable from the pick through the restart.
- Operated cranes — all terrain, rough terrain, carry deck and boom trucks
- Certified operators working alongside LMM's own riggers
- Millwright, electrical, heavy haul and storage scope under one contract
- Michigan-based since 1997, with 500+ pieces of owned equipment
Scope of this page
The Lift Is the First Hour. The Recovery Is the Rest.
Two different problems search this term. Only one of them belongs on this page.
If a fixed overhead bridge crane or hoist has stopped working, that is a repair and inspection call, and the right vendor is a firm that services fixed lifting systems — overhead crane failure in a live plant walks through what to do in the first minutes. If a crane has to be brought to the plant to lift, stabilize, remove or set a piece of equipment, that is this page: operated mobile cranes and rigging crews on your floor, working around what is still running.
Crane hours only solve the first hour. Once the load is off the floor, a maintenance lead still has to find riggers, millwrights, an electrician, a truck, and somewhere to put a damaged machine — and then owns the coordination between all of them while the line sits idle. That coordination, not the pick itself, is usually what decides the restart date.
LMM is the single accountable partner for industrial heavy equipment moving solutions. Operators, riggers and millwrights are union-signatory crews — Operating Engineers, Millwrights and Laborers — working under one contract with one point of contact, and the company has been employee-owned since 2023, which is a fair description of who answers for the job. An unplanned call gets the same load analysis, the same written plan and the same defined load path as a scheduled project, compressed into the time available rather than skipped for it.
The crews and the equipment are LMM's own. This is not a rental yard and not an equipment supplier, which is why accountability does not change hands partway through an event. Flint work draws on the same Michigan crane service capability and the same 500+ pieces of owned equipment that back scheduled projects across the state.
What Mobilizes When You Call
Four capabilities that travel together, not four vendors you have to assemble.
-
Operated cranes, 15 to 500 tons
All terrain, rough terrain, carry deck and boom truck configurations are available across LMM's owned fleet. The machine is matched to the access and the load, not to whatever happens to be free on the yard.
-
NCCCO-certified operators and certified riggers
Operators and riggers work as a single crew rather than as two bookings. The pick and the rig get planned together, so nothing is handed between vendors at the point it matters most.
-
Millwright and electrical support
Crews disconnect and secure the equipment before the lift, then reinstall, align and re-power it afterward. One scope, one contract, no second mobilization to finish the job.
-
Heavy haul and industrial storage
If the machine cannot stay on the plant floor, LMM moves it out and holds it in its own warehousing. It stays protected while a repair or a replacement is sorted out.
Responding Into Flint, Genesee County and the I-75 Corridor
Coverage from both directions, with I-69 running east-west across the county.
Pontiac lies south of Flint on I-75 and the Saginaw branch lies north of it, which is the practical reason a Flint call can be answered from either side depending on which crane configuration the site needs. I-69 crosses Genesee County east to west, so sites off the interchange are reachable without routing a machine through downtown traffic. LMM responds into Flint, Grand Blanc, Burton, Flushing, Swartz Creek, Davison, Fenton and Mount Morris, and the same crews cover emergency crane service in Saginaw, MI and emergency crane service in Detroit, MI from our Michigan facilities.
The plants in this corridor are LMM's customers, not LMM's identity. Automotive and OEM manufacturing brings line-down changeovers and press or die-handling emergencies, where the lift has to happen in an aisle that was never designed for it. Metals processing brings unplanned removals governed by heat, tight access and a neighboring line that is still in production. General and tier manufacturing brings everything in between. Energy and utility work means transformer, generator and vessel handling on sites that stay energized while the work happens. Food and agricultural processing brings failures that cannot wait for a scheduled window because the product will not wait either. Across those sectors LMM's customer list includes Ford, GM, Stellantis, Toyota, Cummins, DTE, Consumers Energy, General Electric, Kaiser Aluminum and Michigan Sugar.
Most of these calls share a shape. A press or a bearing lets go. A chiller or a transformer has to come out through the roof. A vessel shifts and has to be stabilized before anyone goes near it. A shutdown pick runs past its window and the restart date does not move. LMM has worked that shape in Michigan since 1997, across more than 50,000 completed projects — and the same crews handle scheduled crane work in the same corridor, without the clock.
Corridor coverage
How it works
How an Emergency Response Runs
Five beats, from the first phone call to the handoff back to your team.
-
Intake
Tell us the equipment, its approximate weight if you have it, how we get to it, what is overhead, and whether the line is still running. That conversation determines which crane leaves the yard and which trades ride with it. If the numbers are not in front of you, we work from what you have and confirm the rest on site; what a same-day crane response looks like hour by hour covers the questions worth having ready.
-
Assessment
On arrival, site evaluation and load analysis come before anything is rigged. Ground bearing capacity, outrigger positions, cribbing, pick and set radii, and the clearances between the load path and everything still in production all get checked against what the intake call described.
-
The plan
The pick gets an engineered lift plan. Unplanned work compresses the timeline, not the discipline, and the plan is written down before the load comes off the floor. Crane and rigging work is performed under the applicable OSHA cranes and derricks requirements for operator qualification and assembly.
-
Execution
A defined load path, a defined signal person, an NCCCO certified operator and certified riggers. At LMM, safety isn't just a priority — it's a way of life, and on a plant floor that means training, radio discipline and personal accountability rather than a slogan on a sign. You can read how we run safety in detail.
-
Handoff
Before we leave, you get a plain account of the condition of the machine and the floor, what was secured, and what the next scope looks like: reinstall in place, move out and store, or set a replacement. One scope for what comes next, instead of three vendors describing three versions of it.
We thrive in technically demanding environments, delivering results under tight timelines, limited access, and challenging conditions.
How it works
After the Pick: Getting the Line Back
The part of the event a crane booking does not cover.
Once the load is secured, the decision belongs to the maintenance lead, and it is a three-way one: does the machine come back into service where it stands, does it have to leave the floor, or is this a replacement? Each answer sends the recovery down a different road, and the roads are usually different vendors. Here they are the same contract. Repairable in place stays with LMM's millwrights and electrical support, and if the event took the plant's supply with it, emergency power generation carries the critical loads until the permanent fix is in.
If the floor has to be cleared, rigging and heavy haul and LMM's own industrial storage and warehousing take the asset off the critical path while the repair or sourcing question gets answered, so the decision is not made under pressure from a machine sitting in an aisle. If the answer is a replacement, new equipment installation sets and commissions it against the restart date. And when a recovery turns out to be the first move of a larger change — a cell, a line, a whole plant — it rolls into machinery relocation without a new contractor arriving to learn the building.
All of it sits inside the emergency industrial support service line, with LMM ready to assist at any point in the project lifecycle, from conception and definition to lights on. On an unplanned event, that means nothing gets re-scoped, re-bid or re-explained halfway through. One contract. One point of contact.
Line Down in Flint? Call (248) 499-6086.
Call and we match a crew and a crane to your site.
If the situation is urgent but not immediate, send the site details and we will come back with a scope. Crews mobilize into Genesee County from Pontiac and from the Saginaw branch, and the same contract covers the lift, the trades and whatever the machine needs next.
What to send with the site details
- The equipment and its approximate weight, if you have it
- The access route to the machine
- What is overhead and what the clearances are
- Whether the line is still running